Red First Contact Starter Kit - RFCS

Red First Contact Starter Kit. This kit is an excellent choice when evaluating whether our spray formula or non-spray formula polymer will work best for your process and substrates.
Kit contains:
  • 1 x 15 ml Red First Contact Polymer Applicator Bottle
  • 2 x 29 ml Red Spray First Contact Bottles
  • 1 x 29 ml Red First Contact Thinner for cleaning spray heads
  • 15 Peel Tabs
  • 80 ml spray bottle
  • 2 x 80 ml Spray Bottle spray heads
  • Sample of FCUF (floss) and FCNet (chemically inert mesh)
Instruction:
This kit contains sufficient SPRAY polymer to clean approximately 160in2 (1,000cm2) square inches and NON-SPRAY polymer to clean ~60in2 (380cm2).

Red First Contact Regular All-Inclusive Kit - RFCRAI

Our Red First Contact Regular All-Inclusive Kit contains 73ml of polymer and all the typical application and removal accessories.
Kit includes:
  • 1 x 15ml Red First Contact Polymer Applicator Bottle
  • 2 x 29ml Red First Contact Polymer Refill Bottles
  • 1 x 29ml Red First Contact Thinner (for brush cleaning)
  • 1 x FCB1 Fan Brush
  • 1 x FCNet Chemically
  • Inert Mesh (5 – 3″ x 3″ sheets)
  • 1 x FCUF 12m Unwaxed Dental Floss
  • 1 x FCPS Pipette Kit (5 pipettes)
  • 30 Peel Tabs
Instructions:
The kit contains enough polymer to clean up to 280in2 (1,800cm2, 1.9ft2) of surface area

Black First Contact Starter Kit - BFCS

This kit is an excellent choice when evaluating whether our spray formula or non-spray formula polymer will work best for your process and substrates.
Our Black Polymer Formula is for optical microscopy and other processes where backside reflection suppression is desired.
Kit contains:
    • 1 x 15 ml Black First Contact Polymer Applicator Bottle
    • 2 x 29 ml Black Spray First Contact Bottles
    • 1 x 29 ml Black First Contact Thinner for cleaning spray heads
    • 15 Peel Tabs
    • 80 ml spray bottle
    • 2 x 80 ml Spray Bottle spray heads
    • 1 Pipette
    • Sample of FCUF (floss) and FCNet (chemically inert mesh)
Instructions:
This kit contains sufficient SPRAY polymer to cover approximately 160in2 (1,000cm2) square inches and NON-SPRAY polymer to cover ~60in2 (380cm2).

DTC Formula First Contact Starter Kit - CFCS

This kit is an excellent choice when evaluating whether our spray formula or non-spray formula polymer will work best for your process and substrates.
The DTC Polymer Formula was developed in response to anomalously high adhesion and surface staining with some First Contact Polymer products on strained and reactive surfaces like fresh diamond turned copper, brass, aluminum alloys, and other alloys containing copper.
Kit contains:
  • 1 x 15 ml DTC Formula First Contact Polymer Applicator Bottle
  • 2 x 29 ml DTC Formula Spray First Contact Bottles
  • 1 x 29 ml DTC Formula First Contact Thinner for cleaning spray heads
  • 15 Peel Tabs
  • 80 ml spray bottle
  • 2 x 80 ml Spray Bottle spray heads
  • 1 Pipette
  • Sample of FCUF (floss) and FCNet (chemically inert mesh)
Instructions:
This kit contains sufficient SPRAY polymer to clean approximately 160in2 (1,000cm2) square inches and NON-SPRAY polymer to clean ~60in2 (380cm2).

FC WR Water Resistant First Contact Starter Kit - WFCS

This kit is an excellent choice when evaluating whether our FC WR Water Resistant First Contact spray formula or non-spray formula polymer will work best for your process and substrates.
Kit contains:
  • 1 x 15ml Water Resistant Formula First Contact Polymer Applicator Bottle
  • 2 x 29ml Water Resistant Formula Spray First Contact Bottles
  • 1 x 29ml Water Resistant Formula First Contact Thinner for cleaning spray heads
  • 15 Peel Tabs
  • 80 ml spray bottle
  • 2 x 80 ml Spray Bottle spray heads
  • 1 Pipette
  • Sample of FCUF (floss) and FCNet (chemically inert mesh)
Instructions:
This kit contains sufficient SPRAY polymer to clean approximately 160in2 (1,000cm2) square inches and NON-SPRAY polymer to clean ~60in2 (380cm2).